Skip to content
Shoei GT-Air 3 Helmet - Matte Blue
0121-0132-05
- Call for Price - We Offer The Best Prices - Cell: 805-907-8811
- In stock, ready to ship
Earn [points_amount] when you buy this item.
- Earn 5% in Ride Rewards
- Authorized Shoei Dealer
- Free UPS 2 Day Shipping on Shoei Helmets ⚡ (Lower 48)
- No Sales Tax, except California
- 90 Day Free Returns & Exchanges
Why is proper helmet fitment important?
- Helps improve helmet safety
- Maximizes comfort
- Reduces noise levels and distractions
- Helps keep the helmet on the rider’s head during an accident
- Helps maximize the safety benefits of the helmet
- ***Safety standards (like DOT or SNELL) are valid only for properly fitting helmets
Finding the right size to start with:
- Pass a soft, flexible tape measure horizontally around the head, approximately 1-inch above the eyebrows
- Move the tape measure up and down slightly to find the largest measurement
- Cross reference with the appropriate size chart and select the helmet size that is closest to the measurement
- If the head measurement falls between 2 sizes, then try on the smaller of the 2 helmets first (use the size chart as a starting point)
When the helmet is on, complete these steps:
- Check that the helmet inner lining fits snugly all around the rider’s head
- Check that the top pad presses on the top of the rider’s head
- Check that the cheek pads press against the rider’s cheeks. When opening and closing the mouth, the rider’s teeth should drag along the inside of the cheeks.
Confirm these aspects of fitment:
- Make sure you CANNOT easily slide two fingers into the helmet along the side of the rider’s temple
- With the chinstrap properly fastened, grab the helmet with one hand on each side. Without moving the head, try to move the helmet up/down and side-to-side.
- The rider should feel the skin of the head and face being pulled as the helmet is moved, and it should not be easy to move.
- If the helmet can be moved around easily and does not “grab” the rider’s cheeks, it is TOO BIG!
Signs a helmet is TOO BIG:
- Helmet may “fall” onto the head with little resistance
- Noticeably loose around the crown of the head
- Eyes are located near the top of the helmet’s viewpoint
- Helmet can move independently of the rider’s head, no pulling on the skin when helmet is moved up/down and side-to-side
Signs a helmet is TOO SMALL:
- Helmet will be extremely difficult to put on
- Likely to cause immediate pressure points
- Eyes are likely located lower within the helmet’s viewpoint
Signs a helmet fits PROPERLY:
- Helmet may take some effort to slide over head
- Helmet should fit snugly around the crown of the head, without overwhelming pressure
- Eyes are located in the center of the helmet’s viewpoint
Rotation Tests that must be performed:
STEP 1
- Securely fasten the chin strap
- Place your hands on the back of the helmet
- Try to push the helmet off by rotating it forward
STEP 2
- Place your hands on the front of the helmet
- Try pushing it off by rotating it rear-ward
RESULTS: With the correct size helmet, there should be LITTLE MOVEMENT, and the helmet should stay SECURELY IN PLACE.
The SHOEI GT-Air 3 Helmet in Matte Blue offers a perfect blend of contemporary styling, cutting-edge safety features, and long-lasting comfort for touring enthusiasts. Boasting a built-in sun visor, sleek aerodynamic profile, and seamless Shoei Comlink system, this helmet is the ultimate companion for an unparalleled riding experience.
We are an Authorized Shoei Dealer through Helmet House. All Shoei helmets sold in the U.S. come from Helmet House whether you buy from us or the biggest companies in the market. You can see us as an authorized dealer at this link below...
https://helmethouse.com/dealers/4955008-motor-psycho-sport.html
- Optimized Aerodynamic Performance
- Wind Tunnel Tested for Maximum Noise Reduction
- CNS-1C Pinlock® Shield System – Includes Pinlock® Lens
- Enlarged QSV-2 Sun Shield System
- Enhanced Air Circulation Through Multiple Venting and Extraction
- AIM Shock-Absorbent Shell and EPS Liner for Improved Impact Protection
- Emergency Quick-Release System (E.Q.R.S.)
- Micro Ratchet Chin Strap
- SHOEI Comlink System Integrates With Optional SENA SRL 3 for Simplified Installation
- Breath Guard and Chin Curtain Included
- Standards: DOT
- Construction: AIM (Advanced Integrated Matrix) Shell
- Weight: 3.91 lbs / 1,774.75 g (approx. based on size medium solid color)
*The weight listed is for the helmet alone and does not include the chin curtain, breath guard, or intercom
Step into the future of touring with the SHOEI GT-Air 3, a helmet that combines cutting-edge safety, comfort, and aerodynamics for the modern rider. Designed with a sleek, aerodynamic silhouette, it reduces noise while delivering exceptional performance on the open road. Safety comes first with its shock-absorbent AIM shell, multi-density EPS liner, and the Emergency Quick Release System (E.Q.R.S.), ensuring you're protected in any situation. The mist-retardant CNS-1C Pinlock® visor and stainless-steel Micro Ratchet System provide clear vision and security.
Comfort is paramount, featuring a QSV-2 sun visor and 3D center pad, with cheek pads in various thicknesses for a personalized fit. The detachable, washable pads keep you fresh on long rides, while the integrated Shoei Comlink system keeps you connected. Ventilation is engineered to perfection, with multiple inlets and outlets, an insect filter, and adjustable vents for ultimate airflow. Aerodynamically enhanced with an integrated spoiler and wind tunnel testing, the GT-Air 3 delivers a smooth, quiet ride, making it the go-to helmet for touring enthusiasts seeking both style and substance.
